11Oct
The Function Of The Elevator Emergency Stop Button And correct use method
- The elevator is equipped with floor doors, car running direction indicators, mathematical display car, running position indicator and call elevator button at each service floor station. When the elevator call button is used, press the up direction button to go upstairs, and press the diretion button to go downstairs.
- When the car arrives, the floor direction indication will show the moving direction of the car. Passengers enter the car after judging the direction they want to go and confirming that the elevator is normal. Pay attention to the closing of the door, and do not stay at the docking point between the floor door and the car door.
- There are position display, control panel, door switch button and floor selection button in the car. After entering the car, press the floor selection button of the desired floor. To close the car door immediately, press the door close button. The car floor position indicator shows that you have reached the floor and you can leave after the car door is opened.
- The rated load of this elevator is 13 people, and it cannot be overloaded. Please take the initiative to withdraw when the people are overloaded.
- Passenger elevators cannot often be used as freight elevators, and flammable and explosive products are absolutely not allowed to be shipped.
- When an abnormal phenomenon or failure occurs in the elevator, you should keep calm, call the rescue phone in the car, and do not open the door without authorization to try to escape from the car.
- Passengers are not allowed to rely on the car door, smoking and littering in the car are not allowed, and the car is kept clean and hygienic.
- Passengers should take care of the elevator facilities, and should not arbitrarily press buttons or pry on the door.
- The driver must strictly perform the duties of the post. During the operation of the elevator, the driver must not leave the post. If the fault is found, it should be dealt with and reported in time.
- The driver is not allowed to use the inspection and emergency stop buttons as the elimination call signal before starting the normal operation; it is not allowed to use the inspection speed to operate under the condition that the floor and the car door are open; it is not allowed to open the car top trap door and safety door ; It is not allowed to transport super-long objects at the inspection speed; it is not allowed to use the manual car door opening and closing as the start or stop function of the elevator; it is not allowed to change direction suddenly during operation.
- The driver should always check the operation of the elevator, contact the elevator for maintenance regularly, and keep a record of maintenance.
- When the elevator is out of use, the driver should park the car at the base station, turn off all the switches on the operating panel, and close the landing door. In case of a power outage notice, stop the elevator in advance.
